110v heat gun

110V DIY Using Heat Gun Electric US Power tool hot air 300W temperature Gun with supporting seat Shrink Plastic DIY hand tool

Attention:

1. Do not blow the hot air gun directly at 90° to the object

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm

3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it

4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits

Mini Heat Gun, Electric Phone Repair Heat Tool Compact Hot Air Gun for DIY Embossing Shrink Wrap Drying Paint 110V

★ Material ★: Hot air shrink gun was made of high-quality stainless steel and ABS plastic, Dimensions 225*45mm / 8.86*1.77in
★ Voltage&Cooling Holes ★: Voltage 110V, the temp of the nozzle could reach 200° in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life!
★ Suitable for ★: heating shrinkable film, embossed powder, rubber stamp. Built-in stand for self-support and tabletop use!
★ Handing part ★: adopts salient point nonskid designs that cause safe handholding with small energizing!

JCD Hot air gun 8858 Micro Rework soldering station LED Digital Hair dryer for soldering 700W Heat Gun welding repair tools

8858 Hot Air Gun

【specification】

Hot air gun

Voltage: AC220-240V / AC100-130V

Frequency: 50Hz / 60Hz

Output power: 750W

Temperature range: 100 ° C to 480 ° C

Temperature stability: ± 2 ° C

Air flow: 150 liters per minute (maximum)

【Product Description】

1. Portable handheld digital LED display

2. Adjust the keyboard to control the air flow and temperature

3. For nozzle replacement, refer to the instructions for the three types of nozzles (large, medium, and small) that come with the product.

4. If the temperature is below 70 ℃, the rotation can be stopped automatically.

5. High quality strength and long service life

6. Safe welding of QFP, PLCC, BGA and other temperature sensitive components

7. Intelligent guidance and cold air flow function

8. The green line, high quality silicon body and excellent heat dissipation extend the service life and save energy.

9. Portable and digital LED Bga reworkstation with brushless fan, 100W ~ 650W technical data.

JIGONG 110V DIY Using Heat Gun Electric Power tool hot air 300W temperature Gun with supporting seat Shrink Plastic

HOT AIR GUN

Rated Voltage: 110v

Rated Frequency: 50-60HZ

1. in the heat tool

2. the product as shown on the picture.Do not touch the hot nozzle

3. Keep 5-6cm distance between the heat tool and item

4.not use more than 2-3 minutes continuosly to prevent overheated

Package include

1x Heat Gun

Attention:

1. Do not blow the hot air gun directly at 90° to the object

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm

Payment

1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry

Shipment

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

6. If you have not received your shipment within 60 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. Delivery Time:60 days

Return/ Refund

1. You have 7 days to contact us and 60 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Warranty

All products have been checked and packaged in good condition before dispatch.

In case the item is defective, please inform us within 30 days of receipt, we will replace a new one. No Refunds are offered.

Buyers have to pay for the return cost and we will pay the cost for resend.

Feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

It is impossible to address issues if we do not know about them!

Customer is NO.1, Your satisfication is Our Goal !!!!

Satisfied with us, please give us Five-Star Feedback!!!!

LCD Display Hot Air Gun 110V/220V Industrial Dual Wind speed Temperature controlled Building Hair Dryer Heat Gun Nozzle

DSUNYK 2000W Mini Heat Gun Professional Hair Dryer LCD Temperature Control Digital Heat Blower Shrink Wrapping Heat Gun Tool

DSUNYK Heat gun revair hair dryer with LCD temperature control Heat blower 2000W 220V heat gun for welding Construction tools

With the function of delayed shutdown, the hot air gun continues to blow cold air to cool the heating core, protect the heating core and prolong the service life

Insulated heating core imported from Germany
Mabuchi-Motor imported from Japan

Product features:
1. The double heating wire rises rapidly
2. Mica heat insulation of gun barrel is safe and reliable
3. ABS nylon engineering handle is comfortable to hold
4. Two gear wind speed regulation is suitable for many scenarios

matters needing attention:
① When using the hot-air gun, try to use it in a dry place.
② When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.
③ The handle of the hot air gun must be kept dry, clean and away from oil or gas.
④ After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.
⑤ Do not block or cover the air inlet and outlet of the hot-air gun.

Safety warning:
1. Don't use it as a hair dryer for blowing my hair.
2. Do not point the hot air gun directly at people or animals
3. Do not use near inflammables and flammable gases

Product parameters:
Working voltage: 220-240V / 50Hz
Power consumption: 2000W
Temperature range: 60-650 ℃
Temperature regulation mode: Key temperature regulation
Air volume: 300 / 600 L / min
Switch: second gear wind speed adjustable
Shell material: PP + 15% glass fiber
Rear cover shell material: ABS
Motor: Japan 365 Mabuchi-Motor
Heating cylinder: Luo iron plated material
Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework

Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding

2-1.0m3 into the machine part, with an outer diameter of 6.8mm

DSUNYK Heat gun revair hair dryer with LCD temperature control Heat blower 2000W 220V heat gun for welding Construction tools

LCD version
Insulated heating core imported from Germany
Mabuchi-Motor imported from Japan

Product features:
1. The double heating wire rises rapidly
2. Mica heat insulation of gun barrel is safe and reliable
3. ABS nylon engineering handle is comfortable to hold
4. Two gear wind speed regulation is suitable for many scenarios

matters needing attention:
① When using the hot-air gun, try to use it in a dry place.
② When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.
③ The handle of the hot air gun must be kept dry, clean and away from oil or gas.
④ After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.
⑤ Do not block or cover the air inlet and outlet of the hot-air gun.

Safety warning:
1. Don't use it as a hair dryer for blowing my hair.
2. Do not point the hot air gun directly at people or animals
3. Do not use near inflammables and flammable gases

Product parameters:
Working voltage: 220-240V / 50Hz
Power consumption: 2000W
Temperature range: 60-650 ℃
Temperature regulation mode: Key temperature regulation
Air volume: 300 / 500 L / min
Switch: second gear wind speed adjustable
Shell material: PP + 15% glass fiber
Rear cover shell material: ABS
Motor: Japan 365 Mabuchi-Motor
Heating cylinder: Luo iron plated material
Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework
Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding
2-1.0m3 into the machine part, with an outer diameter of 6.8mm

Thermal blower,Heat Gun,heat guns,Professional power tools,hot air gun,Air wrap,Thermoregulator,Industrial,heat gun for welding,Shrink wrapping

Heat gun,Construction tools,Heat blower,heat gun for welding,revair hair dryer,construction hair dryer with temperature control air gun with lcd. Technical hair dryer,Hot Air Gun Digital,Professional hair dryer,heat gun.

mythtiger 110V US PLUG Side LCD Display Heat Gun Thermal blower hot air gun Air dryer for soldering Professional power tools

NO LCD Display Version

Application: remove paint, peel old vallpaper, remove plastics floor tile, bend pvc pipe,melt litter in pipe, remove greasy litter, for shrink w-rap.

Features:

Stepless temperature adjustable knob, 60-600℃ contant temperature adjustment can weld a variety of plastics types.

Digital display design can b-etter adjust the temperature.

Fine quality heating elements ensure reliable and s-afe operation.

The temperature and air v-olume can be easily adjusted.

Power output is stable, quick speed, suitable for long time operation, to prevents overheating burned.

Can be applied in soldering, welding PVC, shaping, drying, shrink-fitting, stripping paint, etc.

With high temperature resistant heat insulation s-hield and dustproof i-nlet, s-afe to use.

With a h-anging loop for convenient storage.

Specifications:

Main material: metal+plastics

Plug: EU-plug, 220V, 50Hz/US PLUG 110V

Power: 2000W

Temperature: 60-600℃

Side LCD Display Version

Specifications:
Main material: metal+plastics
Plug: EU-plug, 220V, 50Hz/US PLUG 110V
Power: 2000W
Temperature: 60-600℃
Air v-olume: 350L/min, 500L/min (adjustable)
Noise: 30dB

Back LCD Display Version

Multifunction DIY Soldering Hot Air Heat Gun Mobile Phone Repair Tool Portable Hair Dryer Shrink Wrapping US/EU Plug 220/ 110V

Feature:

100% new high quality

Heat-up quickly, the maximum temperature can only reach 200°C( can't adjustable)

With ABS material outside and stainless steel inside

Micro-circulation cooling system is adopted

Mini hot air gun is a perfect tool for DIY craft works

Can be used for embossing powder, heat-shrinkable film, clay, bump, rubber stamp, fast-drying paint, glue, catalytic adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle

material: plastic

Colour: Black

Rated power: 300W

Rated voltage: 220V/110V

Plug type: US plug/EU Plug

Length: 24 cm

Air outlet diameter: 12mm

Package Included

1 x hot air gun

110V US PLUG Side LCD Display 100-600D Heat Gun Thermal blower hot air gun Air dryer for soldering Professional power tools